Create ID & Password

  • Go to http://en.midasuser.com
  • Click New Account and Create ID / Password. (If you are a MUSS user already, you do not need to create new ID/Password.)
  • Go to the following Download
  • Click Commercial Version
  • Log in using your Muss ID & Password

Download Install Files

  • Find midas FEA section
  • Click "Installation Files"
  • Click "Downloads"
  • Go back to the previous page and click "Patch" (If there is Patch available. This depends on the versions available at the moment)
  • Click "Downloads"
  • [Save] or [Save As] the installation files.
  • [Open folder]
  • Find the installation zip file downloaded.
  • [Extract] the zip file.
  • Double click "setup.exe" to start the installation

Install midas FEA

  • Click [Next] and follow the next step.
  • Click [Yes]
  • Enter User Name and Company Name.
  • Click [Next]
  • Click [Next]
  • Select the feature you want to install. It's recommended to select the ones that are selected automatically.
  • Click [Next] and follow the next step.
  • Click [Next]
  • Select the program folder.
  • Click [Next] and follow the next step.
  • Select [I Agree]
  • Then, [Next]
  • Select download folder.
  • Click [Next] and follow the next step.
a) Web License Type
  • Do not install
  • If your license is web license type, you do not need to install The Sentinel Protection Lock Driver.
  • Click [Next] and follow the next step
  • Click [Next]
b) Hardware License Type
  • Stand alone or Lan client
  • If your license is a hardware lock type or you are unsure about the license type, select "Stand alone or Lan client" option and complete installing the Protection Lock Driver.
  • Click [Next] and follow the next step
  • Click [Next]
  • Click [Finish]
  • Click [Next]
  • Click [Finish]

Apply the Patch

*If there was any patch available on step #4 in Create ID & PW section.
  • Copy every file and folder in the downloaded patch zip file.
  • Go to where midas FEA is installed, most likely at C Drive > Program Files > MIDAS folder > midas FEA folder (this may not be the same for the users' computer)
  • Paste all the copied files and folders.

Authenticate midas FEA

a) Web License Type
  • Click [Register Protection Key] icon.
  • In the pop-up window, select "Web Authentication"
  • Enter User ID / Password. (If you do not have go to #6 to create a new account)
  • Enter Protection key ID : (16 characters)*
  • Click [Lock Option Configuration]
  • Select the correct PID*
  • Click [Update]
  • Click [Select All] to make sure every Options are checked on or desired module options.
  • Click [OK]
  • Click [OK] to complete registering the protection key.
b) Hardware Dongle License Type
  • Click [Register Protection Key] icon.
  • In the pop-up window, select "Hardware Lock"
  • Enter the Key Number (aka Product Key ID: PKID) - (16 characters)*
  • Select the proper Key Type: [Stand-alone] or [Network]
  • For the [Network] type, select the proper [Protocol] type and enter the [Server Name or IP Address] if necessary. For more details about the Network license set up, please ask your IT Department.

Start the Program

  • Click midas FEA icon at the top left corner
  • Select [New Program]

Installation Troubleshooting

  • AMD graphic cards Control Panel Device Manager Display Adaptors

    midas FEA works best with NVIDIA graphic cards. If your computer is using AMD graphic cards, please download these patches in numerical order.
    AMD Patch Case 1
    AMD Patch Case 2
    AMD Patch Case 3
  • After downloading the first patch file, unzip it and run
  • As soon as you run the file, it will bring up WindowDos command window, please follow through.
  • Try them in numerical orders and contact us if you experience further problem with our software. ts@midasit.com